Home > Products > RF Active Power Splitters > 4 Way Active Power Splitter
● Model: XQY-PS4-A10-DC/5-SFI
● GNSS/GPS Splitter
● SMA Female Connector
● 4 Way Active Splitter
● 50Ω / 0.05-3GHz
● Customizable Specifications
● Click the “Download” button for the datasheet
XINQY carries a wide selection of GPS power divider or GNSS power divider to fit your needs with great performance in GPS (L1-L5), GNSS, Galileo, BeiDou / COMPASS, GLONASS,NAVIC and QZSS antenna splitting applications.
XINQY GPS Splitter , an Active Splitter, can distribute one signal into multiple signals, with internal amplifier to provide gain and compensate for line loss.The typical application for active splitter allows an active GPS roof antenna input , then split evenly multiple signals from the receiving GPS units. This will cover 95% of applications.
In order to power an GPS antenna, active splitter can be configured to pass the DC from an RF output (OUT1) to the antenna input port. Please find the attached parameter tables for more details.
Passive GPS Splitter Active GPS Splitter
Passive GPS power divider can work normally GPS antenna splitter needs a coaxial line to feed DC
without external power, only have input signal. so that its internal amplifier to function properly.
OUT2~4 power divider internal straight block Active GPS power divider usually have built-in
GPS receiver 2~4 DC. Keep the DC of GPS receiver amplifiers for weak satellite signals.
1. Stable work, simple structure, no power supply。 Internal RF bias circuit to achieve the separation
of DC and RF signals, GPS receivers can both
receive satellite signals and output direct current.
Our company has introduced optional external DC power supply port, automatic DC port selection of GPS power divider, please feel free to inquiry [email protected].
High isolation:The power divider has a high isolation of more than 20 dB, ensuring minimal interference between the output ports.
Wide frequency range:The active power divider operates within a wide frequency range of 50-3000 MHz, making it suitable for a wide range of applications.
Compact design:The power splitter has a compact design, making it easy to install and integrate into existing systems.
Wireless communication: The power divider can be used to distribute a single RF signal to multiple antennas in a wireless communication system, such as a cell phone tower.
Satellite communication: The active power divider can be used to distribute a single RF signal to multiple satellite antennas in satellite communication.
Test and measurement: The active splitter can be used in test and measurement equipment to distribute RF signals for analysis.
Military and defense: The power divider can be used in military and defense systems to distribute RF signals for communication and surveillance purposes.
For any enquiries or any customization, please send email to [email protected] and we will reply to you as soon as possible.
• 4 Way active GPS/GNSS Splitter • Radar
• 0.05-3GHz Frequency Range • Satcom
• Gain: Typ.10±2dB • Aerospace/Aviation
• Isolation: ≥18dB • Test and Measurement
• Combined port VSWR ≤1.40:1(0.05~2GHz) • Military Applications
≤1.65:1(2~3GHz) • Wireless Communications
• Distribution port VSWR≤1.35:1
Electrical Specifications |
|
Frequency Range |
1.1~1.7GHz(Typ);0.05~3GHz(Max) |
Gain |
Typ.10±2dB |
Input VSWR |
≤1.40:1(0.05~2GHz);≤1.65:1(2~3GHz) |
Output VSWR |
≤1.35:1 |
Noise Figure |
≤1.9dB |
1dB Comp. Pt |
-4dBm |
Output IP3 |
6dBm |
Amplitude Balance |
≤1dB |
Phase Balance |
≤±5° |
Isolation |
≥33dB |
Operating Current |
40mA@12V typ. |
DC Through Current |
250mA Max |
DC Through Voltage |
6V~28V (OUT1 in ,ANT out ,OUT2 DC blocked) |
ANT port DC Voltage |
5.0V |
Max RF Input |
3dBm |
Connector Type |
SMA-Female |
Surface Finishing |
Sandblasting oxide |
Supported Satellite Navigation Systems
|
GPS |
Galileo |
BeiDou |
GLONASS |
NAVIC |
QZSS |
Country/ies |
USA |
European Union |
China |
Russia |
India |
Japan |
Coverage |
Global |
Global |
Global |
Global |
Regional |
Regional |
Operator(s) |
US Space Force |
EUSPA, ESA |
CNSA |
Roscosmos |
ISRO |
JAXA |
satellites |
31 |
24 |
35 |
28 |
8 |
5 |
Frequency (GHz) |
L1: 1.58 |
E5: 1.16-1.22 |
B1: 1.56 |
~1.602 |
L5: 1.18 |
L1, L2, L5 |
Model |
Description |
XQY-PS2-A10-DC/5-SFI |
2 Way SMA Active GPS Power Splitter 50-3000MHz |
XQY-PS2-A10-DC/5-TFI |
2 Way TNC Active GPS Power Splitter 50-3000MHz |
XQY-PS2-A10-DC/5-NFI |
2 Way N Active GPS Power Splitter 50-3000MHz |
XQY-PS4-A10-DC/5-SFI |
4 Way SMA Active GPS Splitter 50-3000MHz |
XQY-PS4-A10-DC/5-TFI |
4 Way TNC Active GPS Power Splitter 50-3000MHz |
XQY-PS4-A10-DC/5-NFI |
4 Way N Active GPS Power Splitter 50-3000MHz |